Cutting List Software Mac update#

MetalOpt 6.3 has an update adding a new fab sheet for the RazorGage saw stop and programing to create the RazorGage native file to be used directly on their software. The PC version of MetalOpt must be used to utilize the AutoCAD material Tag data feature and the CSV export feature due to the use of activeX programing.Both the PC and Mac versions of MetalOpt can run the new recap sheet routine.

Cutting List Software Mac for mac#

Older Excel for Mac versions are not compatible with the menu ribbon programing.

The Excel 2016 for Mac must be version 15.17 or newer.

The Mac version of Excel 2016 can run the signature programs of MetalOpt which is the material optimizer and cut list routine.

Both the PC and Mac versions have a new recap routine to quickly create a recap sheet from one or all of the FAB sheets into one sheet to check or print. MetalOpt 7m introduces a Mac compatible version that utilizes the optimizer and cut list programs. This is a major advantage to this program, in that it allows you to format many different parameters, and create the FAB sheet that best suits your needs. This multi-step process allows you to quickly manipulate the data until your ultimate FAB sheet is obtained. This program also now has the beneficial feature of allowing you to import data from AutoCAD into excel and export TAG information back to AutoCAD. When you are satisfied with the material requirements, you need only run the cut list portion of the program to produce a fabrication cut list. The MetalOpt program utilizes your input data (the length, quantity, and the extrusion order length) to format it and to print a fabrication (FAB) sheet. Not only does this program allow for the cutting of extruded aluminum, it can be applied for the cutting of structural steel, wood studs or moldings, as well as, miscellaneous composite panel materials and window or door stock length. It utilizes a Microsoft Excel spreadsheet to calculate the minimum material needed for any particular project.

MetalOpt is a 'keep it simple' bar optimization and cut list program that has been evolving and improving over the past several years to give the user both quick and accurate results. Sheet layout optimization software creates optimized cutting diagrams for plywood panels, lumber, and other sheet materials. Batched Cut list Reports Batched Material Reports.

Cutting List Software Mac pro#

(*3) In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated.Cutting List Software Mac Average ratng: 9,5/10 5789reviewsД¬abinet Pro is the software solution for both the small cabinet shop and the large manufacturer of cabinets.

(*2) Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer. (*1) Will run in 32-bit compatibility mode on 64-bit Windows OS. * : Operation is not guaranteed after warranty period is expired.

Graphtec Pro Studio/Plus Ver.2.10Д¬utting Plotter Controller Ver.2.20B Silhouette Studio Ver.4.3.284Д¬utting Plotter Controller Ver.1.51Д¬utting Plotter Controller Ver.1.40B Graphtec Pro Studio/Plus Ver.2.21Д¬utting Master 2 Ver.2.00 Graphtec Pro Studio/Plus Ver.3.40Д¬utting Master 2 (*3) Ver.2.00Д¬utting Master 2 (*3) Ver.1.99Д¬utting Plotter Controller Ver.1.50B Grit rolling type FC series Cutting Plotters